Lenco SR-600 BT - Manual (Page 5)

E-4
5. SKIP FORWARD/TUNING button
6. PLAY/PAUSE button
7. VOLUME - button
8. VOLUME + button
9. DIMMER/PAIRING button
10. FUNCTION/ button
11. CARRYING HANDLE
12. LED DISPLAY
13. BLUETOOTH INDICATOR
14. MAIN POWER ON/OFF SWITCH
15. USB CHARGING PORT
16. AUX IN JACK
17. DC IN JACK
18. POWER INDICATOR
19. SPEAKER
20. BATTERY BACK-UP COMPARTMENT
21. BATTERY COMPARTMENT (“C” batteries)
POWER SOURCE
The SR-600 BT operates using the supplied AC Adapter (Operate at 100-240 V ~
50/60 Hz ) or 4 X ’C' size (UM-2) batteries (not included).
AC ADAPTOR OPERATION
NOTE: Only use the supplied adapter
1. Plug the AC adaptor into normal AC power outlet socket.
2. Insert the DC plug of the AC adaptor cord into the DC input jack (#18) at the back
of the unit.
3. When the unit is operated using AC adapter, the battery source will automatically
be disconnected.
WARNING : Before connecting to the power supply, ensure that the supply
corresponds to the information on the rating label at the back of the apparatus.
BATTERY OPERATION
NOTE : Disconnect AC adapter before install batteries.
For best performance and longer operating time, we recommend the use of
alkaline batteries.
1. Remove the Battery Door of BATTERY COMPARTMENT (#22) on the bottom of
the unit.
2. Following the polarity diagram shown in the BATTERY COMPARTMENT (#22) to
insert 4 X `C' size (UM-2) batteries and close the door.