Connecting to a computer – Lenco TAB-1013 User Manual
Page 11
11
When you have successfully connected to a Wi-Fi network, the Notifications bar
at the low of the screen will show a Wi-Fi signal indicator.
To learn about how to add a Wi-Fi network when it is not in range or when the
router is set to obscure the network name (SSID); or to configure advanced
Wi-Fi options, please refer to the user manual.
Connecting to a Computer
Connect the tablet to a computer to transfer files.
1.Connect your tablet to the computer. With the included USB cable: Plug the
small end of the cable into the USB 2.0 high speed connector of the tablet.
Plug the large end of the cable into an available USB 2.0 high speed port on
the computer.
2. When your tablet is connected, slide up the USB icon right down on the
screen and then touch icon USB connected.