Lenco TAB-1013 - Manual (Page 5)

5
This unit has been produced according to all current safety regulations. The following
safety tips should safeguard users against careless use and the dangers connected
with such use.
Although this unit has been carefully manufactured and rigorously checked before
leaving the factory, as with all electrical appliances, it is possible for problems to
develop. If you notice smoke, an excessive build up of heat or any other
unexpected phenomena, you should disconnect the plug from the mains power
socket immediately.
Ensure that the unit is sufficiently ventilated!
This unit must operate on a power source specified on the specification label. If
you are not sure of the type of power supply used in your home, consult your
dealer or local power company.
The socketoutlet must be installed near the equipment and must be easily
accessible.
Do not overload AC outlets or extension cords. Overloading can cause fire or
electric shock.
This unit is a class II device. It does not require a grounded connection.
Ensure that the unit is sufficiently ventilated!
Keep away from rodents. Rodents enjoy biting into power cords.
Always hold the plug when pulling out the plug from the mains supply socket. Do
not pull the power cord. This can cause a short circuit.
The screen is made of plastic and can break if damage is done to it. When
broken, be careful with sharp edged plastic splinters to avoid injury.
Avoid placing the unit on any surfaces that may be subject to vibrations or shocks.
To protect the unit during a thunderstorm unplug the AC power cable and
disconnect the aerial. Caution: Do not touch the aerial (RF) connector.
When the unit is not used for long periods of time, unplug the AC power cable for
safety reasons.
Do NOT tap or shake the screen, you may damage the internal circuits. Take
good
To clean the tablet pc use a soft dry cloth. Do NOT use solvents or petrol based
fluids. For stubborn stains, you may use a damp cloth with dilute detergent.
We are not responsible for damage or lost data caused by malfunction, misuse,
modification of the device or battery replacement.
If the device will not be used for an extended period of time, please charge the
battery at least once per month to maintain battery life.
Charge the battery if:
a) The battery level icon displays (An empty battery)
b) The device powers off automatically when restarted.
Do not interrupt the connection when the device is being formatted or transferring
files. Otherwise, data may be corrupted or lost.