Lenco TFT-1020 - Manual (Page 22)

Figure 4.2.11
Press OK button to select Country at the standard of local TV system .and Press CH+/CH-
buttons to select other items. Set Language menu and Time Zone too.
! The region item is decided by the signal of different country’s broadcasting companies.
4.2.3 Special Features at the DTV mode
Electronic Program Guide (EPG)
Pressing EPG key will open the EPG page. In the EPG you will find information about the
programs for the current day and for the following seven days. (Provided that this
information is included in the channel transmission from the distributor)
You may also select the type of program you want information about, like Movie, Sports or
Music.
TELETEXT
Pressing TTX key will open a TTX page, if TTX is transmitted for that channel. Select TTX
pages using the TTX buttons on the remote control.
You can also quickly move to the different page options shown on any page by pressing
cursor left/right.
Sometimes a TTX page may contain sub-pages. When sub-pages are available, they are
numbered on the lower part of the screen. To view a sub page, press OK when no page
numbers have been highlighted. Move to the different sub-pages with cursor left/right.
! The program signal must contain EPG and TTX date.
4.3 Audio and video input
First just inset the plug of the external video cord into yellow jack, and left audio plug into
the white port and right audio plug into the red port.
Press the MODE key to the AV mode, the screen display video play and music.
18