Important safety instructions – Lenco TS-10 User Manual

Page 3

Advertising
background image

2

Safety

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near

water.

6 Clean only with dry cloth.

7 Do not block any ventilation

openings. Install in accordance

with the manufacturer’s instructions.

8 Do not install near any heat

sources such as radiators, heat

registers, stoves, or other apparatus

(including amplifiers) that produce

heat.

9 Protect the power cord from being

walked on or pinched particularly

at plugs,convenience receptacles,

and the point where they exit from

the apparatus.

10 Unplug this apparatus during

lightning storms or when unused for

long periods of time.

11 Refer all servicing to qualified

service personnel. Servicing is

required when the apparatus has

been damaged in any way, such

as power-supply cord or plug is

damaged, liquid has been spilled

or objects have fallen into the

apparatus, the apparatus has been

exposed to rain or moisture, does

not operate normally, or has been

dropped.

12 Unit shall not be exposed to

dripping or splashing.

13 Do not place any sources of

danger on the apparatus (e.g.

liquid filled objects, lighted candle).

14 The mains plug is used as the

disconnect device, the disconnect

device shall remain readily

operable.

Warning

1 Before operating this system, check

the voltage of this system to see if it

is identical with the voltage of your

local power supply.

2

Do not place this unit close to

strong magnetic field.

3 If the system is brought directly

from a cold to a warm location,

or is placed in a very damp room,

moisture may condense on the

lens inside the player. Should this

occur, the system will not operate

properly. Leave the system turned

on for about an hour until the

moisture evaporates.

4 Should any solid object or liquid fall

into the system, unplug the system

and have it checked by qualified

personnel before operating it any

further.

5 Do not attempt to clean the unit

with chemical solvents as this might

damage the finish. Use a clean, dry

or slightly damp cloth.

6 When removing the power plug

from the wall outlet, always pull

directly on the plug, never yank on

the cord.

Important Safety Instructions

Advertising