Denon RCD-M38 - Manual (Page 13)

ENGLISH
10
<1/3> <5>
ON/STANDBY <VOLUME> SOURCE
ON/STANDBY
[ui p]
[ENTER/MEMO]
[VOLUME df ]
[CLOCK]
SOURCE
[CD 1/3]
[MENU]
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this manual
Basic operations Connecting the power cord
Power cord (Supplied)
To household power outlet
(AC 120 V, 60 Hz)
NOTE
• Only use the supplied power cord.
• Be sure the power cord is unplugged from the power outlet before
connecting or disconnecting it to the AC IN.
This section explains how to set the current time, and how to
playback a CD or tuner.
For other operations, see the sections below.
n MP3 and WMA fi les playback (vpage 18)
n Control dock for iPod/iPod® playback (vpage 19)
n Portable audio player playback (vpage 20)
n USB memory device playback (vpage 20)
n Setting the timer (vpage 21)
Preparations
Turning the power on
Press ON/STANDBY .
• The power turns on. Press again to set the power to standby.
• Power indicator
Standby ...................................Off
Power on .................................Green
When the timer is set .............Orange
NOTE
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time, either press
ON/STANDBY to turn off the power, or
unplug the power cord from the power outlet.
• Be sure to stop playback before turning the power off.
n Completely turning off the power
Unplug the power cord from the wall outlet.
• Note that the time setting is cleared when the power cord is
unplugged from the outlet.
• The settings made for the various functions may be cleared if the
power cord is left unplugged from a power outlet for an extended
period of time.