Denon RCD-M38 - Manual (Page 28)

ENGLISH
25
Getting Started
Basic Connections
Advanced Connections
Basic Operations
Advanced Operations
Troubleshooting Troubleshooting
Explanation terms
Specifi
cations
Index
GControl dock for iPodH
Symptom Cause Countermeasure Page
iPod cannot be
played. • Wrong input source selected.
• Cable is not properly connected.
• Control dock for iPod’s AC
adapter is not connected to
power outlet.
• Select an appropriate input
source.
• Reconnect.
• Plug the Control dock for iPod’s
AC adapter into a power outlet.
17
16
–
GUSBH
Symptom Cause Countermeasure Page
When a USB
memory device
is connected,
“USB” is not
displayed. • The set cannot recognize a USB
memory device.
• A USB memory device not
conforming to mass storage class
or MTP standards is connected.
• A USB memory device that
the set cannot recognize is
connected.
• USB memory device is
connected via USB hub.
• Check the connection.
• Connect a USB memory device
conforming to mass storage
class or MTP standards.
• This is not a malfunction.
DENON does not guarantee that
all USB memory devices will
operate or receive power.
• Connect the USB memory
device directly to the USB port.
16
–
–
–
iPod cannot be
played. • Input source other than “USB” is
selected.
• Cable is not properly connected.
• Switch the SOURCE to “USB”.
• Reconnect.
17
16
Files on a USB
memory device
cannot be played. • USB memory device is in a
format other than FAT16 or
FAT32.
• USB memory device is divided
into multiple partitions.
• Files are stored in a non-
compatible format.
• You are attempting to play a fi le
that is copyright protected.
• Set the format to FAT16 or
FAT32. For details, refer to the
USB memory device’s operating
instructions.
• When divided into multiple
partitions, only fi les stored in the
top partition can be played.
• Record the fi les in a compatible
format.
• Files that are copyright
protected cannot be played on
this set.
–
–
20
20
GRemote controlH
Symptom Cause Countermeasure Page
Set does not
work properly
when remote
control operated. • Batteries are worn.
• You are operating outside of the
specifi ed range.
• Obstacle between main unit and
remote control.
• The batteries are not inserted
in the proper direction, as
indicated by the polarity marks
in the battery compartment.
• The set’s remote control sensor
is exposed to strong light (direct
sunlight, fl uorescent light, etc.).
• Replace with new batteries.
• Operate within the specifi ed
range.
• Remove the obstacle.
• Insert the batteries in the
proper direction, following the
polarity marks in the battery
compartment.
• Move the set to a place in which
the remote control sensor will
not be exposed to strong light.
4
4
–
4
4
GCDH
Symptom Cause Countermeasure Page
“00 Tr 00 : 00”
is shown on the
display even
though a CD is
loaded. • The disc is not properly loaded. • Reload the disc. 3
Disc does not
play when
CD
1/3 button is
pressed.
• The disc is dirty or scratched. • Wipe the disc clean or replace
the disc.
3
A specifi c part
of a disc is not
played. • The disc is dirty or scratched. • Wipe the disc clean or replace
the disc.
3
A CD-R or CD-RW
disc cannot be
played. • The disc has not been fi nalized.
• The recording conditions are bad
or the quality of the disc itself
it poor.
• Finalize the disc then play it.
• Use a properly recorded disc. 3
–
MP3 and WMA
fi les cannot be
played. • The fi le formats, extensions or
settings made when the disc
was created are not compatible
with this unit.
• Create discs with fi le formats,
extensions or settings
compatible with this unit.
18
GTunerH
Symptom Cause Countermeasure Page
Continuous noise
is heard when
receiving FM
programs. • Antenna cable is not properly
connected.
• Connect the antenna cable
properly.
• Connect an outdoor antenna.
9
–
Hissing or
continuous noise
is heard when
receiving AM
programs. • This may be noise from a TV or
interference from a broadcast
station.
• Turn off the TV.
• Change the position and
direction of the AM loop
antenna.
–
9