Adjusting the tone, Muting the sound, Switching the display’s brightness – Denon RCD-M38 User Manual
Page 15: Listening with headphones
ENGLISH
12
<1/3>
<BAND/2>
<8/-, +/9>
<VOLUME>
<PHONES>
SDB/TONE
SOURCE
<SOURCE
DIRECT>
[RANDOM]
SOURCE
[CD 1/3]
[NUMBER]
[PROG/DIRECT]
[CLEAR/DEL]
[2]
[REPEAT]
[6, 7]
[8, 9]
[TIME/DISPLAY]
[DIMMER]
[VOLUME
df
]
SDB/TONE
[MUTE]
[o p]
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
Adjusting the tone
1
Use
SDB/TONE
to select the tone parameter to be
adjusted.
SDB
BASS
BALANCE
S. DIRECT
TREBLE
2
Adjust the volume with
<8/–
,
+/9>
,
[8
,
9]
or
[o p]
.
• To make other tone adjustments at this time, press
SDB/
TONE
.
• If no operation is performed for 5 seconds, the adjustment is
retained and the normal display reappears.
SDB
Emphasizes the bass sound when the Super Dynamic
Bass (SDB) function is set to ON.
[Selectable modes] ON
–
OFF
BASS
Adjusts the bass sound.
[Variable range]
–10dB
–
+10dB
TREBLE Adjusts the treble sound.
[Variable range]
–10dB
–
+10dB
BALANCE Adjusts the left/right volume balance.
[Variable range]
L06
–
CENTER
–
R06
S.DIRECT Plays back a disc using the SOURCE DIRECT mode.
During the SOURCE DIRECT mode, the audio signals
bypass the tone control circuits (SDB/BASS/TREBLE/
BALANCE), the music reproduction is more faithful to
the original sound.
Settings made upon purchase:
• SDB .......................................OFF
• BASS ..................................... 0dB
• TREBLE ................................. 0dB
• BALANCE .......................CENTER
• S.DIRECT ..............................OFF
• When “SDB” is ON, you can adjust “BASS”.
• This can also be set using
<SOURCE DIRECT>
.
Operations possible during playback
Muting the sound
Press
[MUTE]
.
“MUTE ON” is displayed.
To cancel, press
[MUTE]
again.
(The mute mode is also canceled when the
<VOLUME>
control is
turned or a
[VOLUME
df
]
is pressed.)
Switching the display’s brightness
Press
[DIMMER]
.
100 %
70 %
40 %
Off
• The display’s brightness switches each time the button is pressed.
Listening with headphones
Plug the headphones (sold separately) into the
<PHONES>
.
• The sound from the speakers is automatically cut off.
NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.