Altera MAX 10 Embedded Memory - Manual (Page 45)

Option Legal Values Description
Do you want to specify the initial content
of the memory?
• No, leave it blank
• Yes, use this file for the
memory content data
Specifies the initial content
of the memory.
• To initialize the memory
to zero, select No, leave it
blank.
• To use a Memory Initiali‐
zation File (.mif) or a
Hexadecimal (Intel-
format) File (.hex), select
Yes, use this file for the
memory content data.
Note: The configuration
scheme of your
device is Internal
Configuration. In
order to use
memory initiali‐
zation, you must
select a single
image configura‐
tion mode with
memory initiali‐
zation, for
example the
Single
Compressed
Image with
Memory Initiali‐
zation option.
You can set the
configuration
mode on the
Configuration
page of the
Device and Pin
Options dialog
box.
The initial content file should conform to
which port's dimension?
• PORT_A
• PORT_B
Specifies which port's
dimension that the initial
content file should conform
to.
UG-M10MEMORY
2015.05.04
RAM: 2-Port IP Core Parameters for MAX 10 Devices 5-17
RAM: 2-PORT IP Core References Altera Corporation
Send Feedback