Altera MAX 10 FPGA - Manual (Page 13)

October 2014 Altera Corporation MAX 10 FPGA (10M08S, 144-EQFP) Evaluation Kit
User Guide
3. Board Components
This chapter introduces all the important components on the evaluation kit.
Figure 3–1 illustrates major component locations and Table 3–1 provides a brief
description of all features of the board.
Board Overview
This section provides an overview of the evaluation kit, including an annotated board
image and component descriptions.
Table 3–1 describes the components and lists their corresponding board references.
Figure 3–1. Overview of the MAX 10 FPGA Evaluation Kit Features
JTAG
Header
(J10)
Arduino
Connector
2x20 GPIO
Through-Hole Vias (J9)
Arduino
Connector
Arduino
Connector
Jumper
(J6)
Jumper
(J7)
2x20 GPIO
Through-Hole Vias (J8)
SW1
SW3
LEDs
USB
Connector
(J1)
SW2
Prototype
Area
MAX 10
FPGA (U2)
Arduino
Connector