Altera MAX 10 FPGA - Manual (Page 22)

3–10 Chapter 3: Board Components
Power Supply
MAX 10 FPGA (10M08S, 144-EQFP) Evaluation Kit October 2014 Altera Corporation
User Guide
Power Distribution System
Figure 3–4 shows the power distribution system on the development board.
Temperature Sense
The ADCs provide the devices with built-in capability for on-die temperature
monitoring and external analog signal conversion.
Temperature sensing mode—monitors external temperature data input with a
sampling rate of up to 50 kilosamples per second. In dual ADC devices, only the first
ADC block contains the temperature sensing diode.
f For more information on the ADC, refer to the MAX 10 FPGA Device Overview .
TP7 Analog GND
Verify the proper voltage required by the FPGA ADC IP block GND
inputs
0-volts
TP8 Digital GND Verify the proper voltage required by the FPGA digital GND inputs 0-volts
TP9 Digital GND Verify the proper voltage required by the FPGA digital GND inputs 0-volts
Table 3–6. Power Measurement Details
Test Pad #’s Measuring Description Expected Value
Figure 3–4. Power Distribution System
5V VCC_CORE
3.3V
VCC_IO
EP5388QI