Opencore plus time-out behavior, Opencore plus time-out behavior -7 – Altera CPRI v6.0 MegaCore Function User Manual
Page 11
OpenCore Plus Time-Out Behavior
OpenCore Plus hardware evaluation can support the following two modes of operation:
• Untethered—the design runs for a limited time.
• Tethered—requires a connection between your board and the host computer. If tethered mode is
supported by all MegaCore functions in a design, the device can operate for a longer time or
indefinitely.
All MegaCore functions in a device time-out simultaneously when the most restrictive evaluation time is
reached. If a design contains more than one MegaCore function, a specific IP core's time-out behavior
may be masked by the time-out behavior of the other IP cores.
Note: For MegaCore functions, the untethered time-out is 1 hour; the tethered time-out value is
indefinite.
Your design stops working after the hardware evaluation time expires.
Related Information
Information about the OpenCore Plus feature.
UG-01156
2014.08.18
OpenCore Plus Time-Out Behavior
1-7
About the CPRI v6.0 IP Core
Altera Corporation