Altera Stratix II EP2S180 DSP Development Board - Manual (Page 8)

1–2 Core Version a.b.c variable Altera Corporation
Stratix II EP2S180 DSP Development Board Reference Manual August 2005
Handling the Board
● Download configuration data using an USB Blaster TM download
cable
■ Single-ended or differential inputs and outputs accessed via a Mictor
connector
■ Dual 7-segment display
■ Four user-defined push-button switches
■ One female 9-pin RS-232 connector
■ 10/100 Ethernet MAC/PHY
■ Eight user-defined LEDs
■ Socketed 100-MHz oscillator
■ Single 16-V DC power supply (adapter included)
■ Active heat sink
Debugging Interfaces
■ One Mictor-type connector for Agilent and Tektronix logic analyzers
■ Several 0.1-inch headers
Expansion Interfaces
■ Two connectors for Analog Devices A/D converter daughter cards
■ Connector for Texas Instruments Evaluation Module (TI-EVM)
daughter cards
Two Expansion Prototype connectors
Handling the
Board When handling the board, it is important to observe the following
precaution:
w
Static discharge precaution—Without proper anti-static handling
the board can be damaged. Therefore, take anti-static
precautions while handling the board.