Parking on hills, Maintenance when trailer towing, Caution – Oldsmobile 2002 Bravada User Manual

Page 256

Advertising
background image

4-55

Parking on Hills

CAUTION:

You really should not park your vehicle, with a
trailer attached, on a hill. If something goes
wrong, your rig could start to move. People can
be injured, and both your vehicle and the trailer
can be damaged.

But if you ever have to park your rig on a hill, here’s how
to do it:

1. Apply your regular brakes, but don’t shift into

PARK (P) yet. Then turn your wheels into the
curb if facing downhill or into traffic if facing uphill.

2. Have someone place chocks under the trailer wheels.

3. When the wheel chocks are in place, release the

regular brakes until the chocks absorb the load.

4. Reapply the regular brakes. Then apply your parking

brake, and then shift into PARK (P).

5. Be sure the transfer case is in a drive gear

--

not

in NEUTRAL (N).

6. Release the regular brakes.

When You Are Ready to Leave After
Parking on a Hill

1. Apply your regular brakes and hold the pedal down

while you:
D start your engine,
D shift into a gear, and
D release the parking brake.

2. Let up on the brake pedal.

3. Drive slowly until the trailer is clear of the chocks.

4. Stop and have someone pick up and store the chocks.

Maintenance When Trailer Towing

Your vehicle will need service more often when you’re
pulling a trailer. See the Maintenance Schedule for
more on this. Things that are especially important
in trailer operation are automatic transmission fluid
(don’t overfill), engine oil, axle lubricant, belt, cooling
system and brake system. Each of these is covered
in this manual, and the Index will help you find them
quickly. If you’re trailering, it’s a good idea to review
these sections before you start your trip.

Check periodically to see that all hitch nuts and
bolts are tight.

Advertising