Oldsmobile 2002 Bravada - Manual (Page 326)

6-37
5. Be sure that the notches are locked by the bottom
claws. Make sure that all other claws are properly
locked on both sides of the insert slots.
A. Claw in Notch
B. Correct Installation
C. Incorrect Installation
6. Put the blade assembly pivot in the wiper arm
hook. Pull up until the pivot locking tab locks in
the hook slot.
7. Carefully lower the wiper arm and blade assembly
onto the windshield.
Backglass Wiper Blade Replacement
See “Windshield Wiper Blade Replacement” listed
earlier in this section for instructions on how to change
the backglass wiper blade. The backglass wiper blade
will not lock in a vertical position like the windshield
wiper blade, so care should be used when pulling it
away from the vehicle.