How to add fluid, Notice – Oldsmobile 2002 Bravada User Manual

Page 309

Advertising
background image

6-20

Then, without shutting off the engine, follow these steps:

Locate the handle with
the transmission and lock
symbols for the automatic
transmission dipstick in
the engine compartment
on the passenger’s side
of the vehicle.

See “Engine Compartment Overview” in the Index for
more information on location.

1. Flip the handle up and then pull out the dipstick and

wipe it with a clean rag or paper towel.

2. Push it back in all the way, wait three seconds and

then pull it back out again.

3. If the fluid level is in the acceptable range, push the

dipstick back in all the way; then flip the handle
down to lock the dipstick in place.

How to Add Fluid

Refer to the Maintenance Schedule to determine what
kind of transmission fluid to use. See “Recommended
Fluids and Lubricants” in the Index.

Add fluid only after checking the transmission
fluid while it is hot. (A cold check is used only as a
reference.) If the fluid level is low, add only enough of
the proper fluid to bring the level up to the HOT area for
a hot check. It doesn’t take much fluid, generally less
than one pint (0.5 L). Don’t overfill.

NOTICE:

We recommend you use only fluid labeled
DEXRON

R

-

III, because fluid with that label is

made especially for your automatic transmission.
Damage caused by fluid other than DEXRON

R

-

III

is not covered by your new vehicle warranty.

D After adding fluid, recheck the fluid level as

described under “How to Check.”

D When the correct fluid level is obtained, push the

dipstick back in all the way; then flip the handle
down to lock the dipstick in place.

Advertising