Headlamp high/low-beam changer, Flash-to-pass, Windshield wipers – Oldsmobile 2001 Intrigue User Manual

Page 102

Advertising
background image

2-35

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check for burned

-

out bulbs and then check

the fuse (see “Fuses and Circuit Breakers” in the Index).

A chime will sound if you leave your turn signal on for
more than 3/4 mile (1.2 km).

Headlamp High/Low-Beam Changer

To change your headlamps
from low beam to high
beam, push the lever
away from you. To change
back to low beam, pull the
lever toward you.

To flash your high beams, pull the lever toward you and
release. The lever will return to the low

-

beam position.

Fog lamps (if equipped) will not be illuminated while
the headlamps are in the high

-

beam mode.

Flash-to-Pass

With the lever in the low

-

beam position, pull the lever

toward you momentarily to switch to high beams
(to signal you are going to pass). If you have the
headlamps on, they will return to low beams when
you release the lever.

Windshield Wipers

You can control the windshield wipers by moving the
lever with the wiper symbol on it up or down. This lever
is located on the right side of the steering wheel.

Advertising