How to reset the change oil light, What to do with used oil – Oldsmobile 2001 Intrigue User Manual

Page 256

Advertising
background image

6-15

How to Reset the CHANGE OIL Light

After changing the engine oil, the system must be reset.
To reset the CHANGE OIL light after an oil change do
the following:

1. With the ignition key turned to ON, but the engine

off, fully push and release the accelerator pedal
slowly three times within five seconds.

If the CHANGE OIL light flashes, the system
is resetting.

2. Turn the key to OFF after the light has finished

flashing, then start the vehicle. If the CHANGE OIL
light comes back on, the engine oil life system has
not reset. Repeat the procedure.

What to Do with Used Oil

Did you know that used engine oil contains certain
elements that may be unhealthy for your skin and could
even cause cancer? Don’t let used oil stay on your skin
for very long. Clean your skin and nails with soap and
water, or a good hand cleaner. Wash or properly throw
away clothing or rags containing used engine oil. See
the manufacturer’s warnings about the use and disposal
of oil products.

Used oil can be a real threat to the environment. If you
change your own oil, be sure to drain all free

-

flowing oil

from the filter before disposal. Don’t ever dispose of oil
by putting it in the trash, pouring it on the ground, into
sewers, or into streams or bodies of water. Instead,
recycle it by taking it to a place that collects used oil. If
you have a problem properly disposing of your used oil,
ask your dealer, a service station or a local recycling
center for help.

Advertising