Subaru 2013 BRZ User Manual
Page 329
327
4-3. Do-it-yourself maintenance
4
M
ain
ten
anc
e a
nd
ca
re
BRZ_U
■
Use a CR2016 (vehicles without a keyless access with push button
start system) or CR1632 (vehicles with a keyless access with push but-
ton start system) lithium battery
●
Batteries can be purchased at your SUBARU dealer, local electrical
appliance shops or camera stores.
●
Replace only with the same or equivalent type recommended by the
manufacturer.
●
Dispose of used batteries according to local laws.
■
If the key battery is depleted
The following symptoms may occur:
●
The keyless access with push button start system (if equipped) and
remote keyless entry system will not function properly.
●
The operational range will be reduced.
■
When putting the module back (vehicles without a keyless access with
push button start system)
Remove the depleted battery.
Insert a new battery with the
“+” terminal facing up.
STEP
3
Insert the module from directly above.
Inserting it on an angle may prevent the
key buttons from operating properly.