Subaru 2013 BRZ User Manual
Page 338
336
4-3. Do-it-yourself maintenance
BRZ_U
■
After a fuse is replaced
●
If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (
→P. 337)
●
If the replaced fuse blows again, have the vehicle inspected by your
SUBARU dealer.
■
If there is an overload in the circuits
The fuses are designed to blow, protecting the wiring harness from damage.
WARNING
■
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
●
Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
●
Always use a genuine SUBARU fuse or equivalent.
●
Do not modify the fuse or the fuse box.
CAUTION
■
Before replacing fuses
Have the cause of electrical overload determined and repaired by your
SUBARU dealer.