Subaru 2003 Legacy - Manual (Page 203)

5
Audio
5-19
– CONTINUED –
FM1 FM2 AM
The display indicates which one is currently selected.
B
Stereo indicator
The stereo indicator “ST” will come on when an FM stereo broadcast
is received.
B
Weather band button (WB)
Push the “WB” button
5
when the radio is off to turn on the radio in
the weather band.
Press the “WB” button when the radio is on to select the weather
band.
B
Manual tuning (TUNE)
n Manual tuning for AM and FM waveband
Push the tuning button
7
marked “
Y” to increase the tuning frequen-
cy and press the tuning button marked “
B” to decrease it.
Each time the button is pressed, the frequency changes 10 KHz in the
AM waveband and 0.2 MHz in the FM waveband.
Constant pressure on the button causes a continuous change in the
frequency.
n Manual tuning for weather band
When weather band mode is selected, press the tuning button
7
marked “
Y” to change the WB channel up and press the tuning but-
ton marked “
B” to change the WB channel down. Each time the but-
ton is pressed, the WB channel changes to the next channel.
Constant pressure on the button causes a continuous change in the
channel.
B
Automatic tuning (SCAN)
Press the “SCAN” button
8
to change the radio to the SCAN mode. In
this mode, the radio scans through the radio band until a station is
found. The radio will stop at the station for five seconds while display-
ing the frequency, after which scanning will continue until the entire