Subaru 2003 Legacy - Manual (Page 217)

5
Audio
5-33
– CONTINUED –
D While the player is in the loading mode, if you press FM/AM selec-
tion button, the player will enter standby mode. Press the “DISC” but-
ton to start playback.
n Loading all the magazine (Full disc loading mode)
1. If you continue to press the “LOAD” button
E
for more than 1.5 se-
conds, the player will produce beep sound and will enter the full disc
loading mode.
2. A “DISC” indicator will blink, and the “CD-IN” will be on display for
a period of 15 seconds. If a disc is successfully loaded during this
period, the “DISC” indicator will stop blinking and will steadily light.
3. When the loading of a disc is complete, the next “DISC” indicator
will blink. Then repeat Step 2.
4. When the magazine is filled with discs by repeating Steps 2 and 3,
the player will start playback of the discs, beginning with the one in-
serted first.
If you fail to insert any disc during each 15-second interval, the full
disc loading mode will be canceled, and the player will start playback
of the disc inserted first.
B
How to play back a CD or make a pause
n When there is no CD inserted:
Insert a CD by referring to “How to Insert a CD(s)”.
When a CD is loaded, the player will start playback of the CD, begin-
ning with the first number.
n When there are CDs loaded:
Press a desired one of the “DISC SELECT” buttons
U
the “DISC” indi-
cator of which steadily lights up. The player will then start playback of
the selected CD, beginning with the first number.