Subaru 2003 Legacy - Manual (Page 211)

5
Audio
5-27
– CONTINUED –
B
Power switch and volume/bass/treble/fader/balance control
(ON/VOL)
The dial
1
is used for both power (ON/OFF) and volume control. The
radio is turned ON and OFF by pushing the dial and the volume is
controlled by turning the dial.
This dial is used for bass/treble controls when the “BASS/TREB” but-
ton
8
is in the depressed position. It is also used for fader/balance
controls when the “FAD/BAL” button
6
is in the depressed position.
Display Control mode
HB5036BA
Turn counterclockwise Turn clockwise
BASS Bass control For less bass For more bass
TREB Treble control For less treble For more treble
FAD Fader control To increase rear speaker
volume and decrease front
speaker volume
To increase front speaker
volume and decrease rear
speaker volume
BAL Balance control To increase left speaker
volume and decrease right
speaker volume
To increase right speaker
volume and decrease left
speaker volume
VOL Volume control For less volume For more volume
n Tone control
The volume control dial
7
normally function as volume control. The
dial become a control for Bass or Treble when you select the ap-
propriate tone control mode.
Choose desired level for each mode by turning the volume control
dial. The control function returns to volume control mode after about 5
seconds.