NISSAN 2010 Frontier User Manual

Page 171

Advertising
background image

● When the

position is selected, the air

conditioner automatically turns on (however,

the indicator light will not illuminate) if the

outside temperature is more than 36°F

(2°C). If the air flow control dial is in
the

position for more than one minute,

the air conditioning system will continue to

operate until the fan control dial is turned to

OFF or the vehicle is shut off, even if the air

flow control dial is turned to a position other
than the

position. This dehumidifies

the air which helps defog the windshield.
The

mode automatically turns off, al-

lowing outside air to be drawn into the pas-

senger compartment to further improve the

defogging performance.

Bi-level heating

This mode directs cooler air from the side and

center vents and warmer air from the floor outlets.

When the temperature control dial is moved to

the full hot or full cool position, the air between

the vents and the floor outlets is the same tem-

perature.

1. Push the

button to the off position.

2. Turn the air flow control dial to the

position.

3. Turn the fan control dial to the desired posi-

tion.

4. Turn the temperature control dial to the de-

sired position.

Heating and defogging

This mode heats the interior and defogs the wind-

shield.

1. Turn the air flow control dial to the

position.

2. Turn the fan control dial to the desired posi-

tion.

3. Turn the temperature control dial to the de-

sired position between the middle and the

hot position.

● When the

position is selected, the air

conditioner automatically turns on (however,
the indicator light on the

button will

not come on) if the outside temperature is

more than 36°F (2°C). If the air flow control
dial is in the

position for more than

one minute, the air conditioning system will

continue to operate until the fan control dial

is turned to OFF or the vehicle is shut off,

even if the air flow control dial is turned to a
position other than the

position. This

dehumidifies the air which helps defog the
windshield. The

mode automatically

turns off, allowing outside air to be drawn

into the passenger compartment to further

improve the defogging performance.

Operating tips

Clear snow and ice from the wiper blades

and air inlet in front of the windshield. This

improves heater operation.

Heater, air conditioner, audio and phone systems

4-5

Advertising