Air conditioner operation -12 – NISSAN 2010 Frontier User Manual

Page 178

Advertising
background image

Defrosting or defogging

This mode directs the air to the defrost outlets to

defrost/defog the windows.

1. Press the defrost/defog button

.

2. Turn the fan control dial to the desired position.
3. Turn the temperature control dial to the de-

sired position between the middle and the

hot position.

● To quickly remove ice or fog from the win-

dows, turn the fan control dial to the highest

setting and the temperature control to the

full HOT position.

● When the

position is selected, the air

conditioner automatically turns on (however,
the indicator light on the

button will not

come on) if the outside temperature is more

than 36°F (2°C). If in defrost mode for more

than one minute, the air conditioning system

will continue to operate until the fan control

dial is turned to OFF, the vehicle is shut off, or

the A/C button is used to turn off the com-

pressor even if the air flow control dial is
turned to a position other than the

po-

sition. This dehumidifies the air which helps
defog the windshield. The

mode auto-

matically turns off, allowing outside air to be

drawn into the passenger compartment to

further improve the defogging performance.

Bi-level heating

The bi-level mode directs warmed air to the side

and center vents and to the front and rear floor

outlets.

1. Press the

button to the OFF position.

The indicator light on the

button will

go off.

2. Press the

air flow control button.

3. Turn the fan control dial to the desired posi-

tion.

4. Turn the temperature control dial to the de-

sired position.

Heating and defogging

This mode heats the interior and defogs the wind-

shield.

1. Press the

air flow control button.

2. Turn the fan control dial to the desired posi-

tion.

3. Turn the temperature control dial to the de-

sired position between the middle and the

hot position.

● When the

position is selected, the air

conditioner automatically turns on (however,
the indicator light on the

button will

not come on) if the outside temperature is
more than 36°F (2°C). If the

air flow

control button is selected for more than one

minute, the air conditioning system will con-

tinue to operate until the fan control dial is

turned to OFF, the vehicle is shut off, or the

A/C button is used to turn off the compres-

sor even if the air flow control dial is turned to
a position other than the

position.

This dehumidifies the air which helps defog
the windshield. The

mode automati-

cally turns off, allowing outside air to be

drawn into the passenger compartment to

further improve the defogging performance.

Operating tips

Clear snow and ice from the wiper blades

and air inlet in front of the windshield. This

improves heater operation.

AIR CONDITIONER OPERATION

Start the engine, turn the fan control dial to the
desired position, and push in the

button to

activate the air conditioner. When the air condi-

tioner is on, cooling and dehumidifying functions

are added to the heater operation.

4-12

Heater, air conditioner, audio and phone systems

Advertising