MIPRO act707tm - Manual (Page 2)

3. Transmitting Antenna: 1/ 4 transmitting antenna.
4. Transmitter Housing: Packages the PCB and battery.
5. Multi-Function LCD Display
6. ACT Signal Receptor: Receiving ACT signal and
adjusting frequency automatically.
7. Gain Control: Adjusts the desirous input gain.
8. GT/MT Level Selector: Switch to GT position when
under usage of electric guitar or any "Line In" audio.
When connects to a condenser microphone or a
wired microphone, switch to MT position and the
gain control can serve as input sensitivity adjustor.
9. Battery Compartment and Cover: Accommodates
two 1.5V(AA) batteries.
10. Detachable Belt Clip: Allows 360 degrees rotating to
suit transmitting angles. To detach simply use a
screwdriver at a 45 degree angle to unfasten. see
diagram below.
1 2
1. PARTS NAME AND FUNCTIONS
(Fig.1)
Bodypack Transmitter Bodypack Transmitter
4
9
8
7
6
5
2
3
10
GROUP CHANNEL BAT
1
Finely crafted and ergonomically designed
ACT-707TM adapts magnesium alloy housing,
LCD panel, and high-efficient transmitting
circuit design with low spurious showcases
MIPRO's professional style.
1. AF Input Jack: Connects to either a lavaliere or a
headset microphone. (See 5 ways of connection on
AF Input Connections)
2. Power Switch: Switch to ON position for operation.
Switch to OFF position when not in use.