MIPRO act707tm - Manual (Page 3)

AA TYPE BATTERY 2
CARRYING STORAGE BAG 1
INSTRUCTION MANUAL 1
FURNISHED ACCESSORIES:
Yes
10mW (or according to regulations)
PLL Synthesizer
<-55dBc
0dBV
Condenser
AA TYPE 2
145gs
105 66 25
ITEM SPECIFICATIONS
SPECIFICATION:
3 4
2. OPERATING INSTRUCTIONS
1 3
4
2
GROUP CHANNEL BAT
OF F
Lavalier
Headset
Please aim of the
fillister and insert
the connector
(Fig.2)
Bodypack Transmitter Bodypack Transmitter
Capsule Connector
1. To adjust GT/MT Switch (9), and Gain Control (7),
simply push down both snap locks on the sides of
battery cover and flip it backwards to expose the
adjustment panel.
2. The LED indicator flashes briefly when power on
indicating normal battery status. If no flash occurs it
has either no battery, the battery is drained or installed
incorrectly. Change accordingly.
3. Plug the microphone connector into the input jack and
tighten the connector screw clockwise direction as
shown in (Fig. 2).
on
ACT Function
RF Output Power
Oscillation Mode
Spurious Emissions
Maximum Input Level
Microphone Capsule
Battery
Weight (g)
Dimensions (m/m)