Applied Motion BLuAC5-Si - Manual (Page 35)

35
BLuAC5-Si Hardware Manual
920-0035E
12/10/2014
Mechanical Outline
Mounting the Drive
The drive can be mounted on the narrow side or the wide side. Either way, you’ll need two #6
screws to secure the drive using the 0.2” mounting slots. The hole pattern and drive outline
are shown below.
•
Never use your drive in a space where there is no air flow or where other devices cause the sur-
rounding air to be more than 40 °C.
•
Never put the drive where it can get wet or where metal particles can get on it.
•
Always provide air flow around the drive.
•
Minimum spacing between drives mounted vertically is .75”.
4.848
7.800
2X 3.50
7.400
2.70
5.050
1.32