Brennenstuhl Illuminated House Number Solar Power SH 4000 E with external solar panel - Manual (Page 16)

Solar power with external solar panel
User's Handbook SH 4000 E Stand: 06_2011 rev. 02 16
Fig. 2: Product guide: housing opened up
No. Description
3
Battery:
Stores the energy supplied by the
solar cell
4 Mounting holes:
To secure the rear panel to the
house wall
5 Cable bush:
Lead-through for connecting lead
to external solar panel
6 Connecting lead with plug:
Connects solar cell to printed
circuit board/power supply
7 Rear panel:
For wall mounting purposes
8 Electronic control circuit incl.
battery holder and socket for
connecting lead, with plug
9 Cover:
Protects the electronics
10 LEDs:
Maintenance-free lights (not
shown)
Table 3: Product guide: housing opened up
Fig. 3: Solar panel
No. Description
11
Solar panel:
The solar cell contained in the
solar panel converts sunlight into
electrical energy.
12 Mounting base
To secure the solar panel
13 Socket
For the connecting lead
Table 4: Product guide: solar panel
7 Installation and operation
The basic functions of the house number
light are explained in this section. Read it
through carefully so that you will understand
and be able to make use of all the functions.
IMPORTANT: Observe the following
instructions, especially those relating to
safety, in order to prevent operating errors
and potential defects.
If you have any problems, refer to the List of
faults (Section 11) or contact our Service
Centre (for contact details, see Section 12).
8
6
3
4 5
7
9
12
11
13