Fl {?h_l {s_m {m_n {b[l {nb^ {m_n {b[l – CIRCUTOR CVM-NRG96 Series (Available until stocks) User Manual
Page 21
CVM-NRG96
M9817250120-03-05A
21
**
Backlight permanently on
*+{…{0*{
Backlight on from 1 to 60 seconds.
These values(t), refer to the time from the last time the equipment was used
via the keypad.
6. Deletion of Energy meters.
Deletion of the eight Energy meters
The display shows ”
=fl{_h_l{hi”.
To select one of the two display options, just press the MAX key and the two
options will alternate.
Once the required option is selected, press the
key to enter the data and
access the following setting step.
7. Setting THd or d
Selecting Harmonic Distortion Analysis
The display shows ”
m_n{b[l{nb^”.
Thd %:
Total value of harmonic distortion referred to the true effective value (RMS).
d %:
Total value of harmonic distortion referred to the fundamental value(RMS).
{=fl
{?h_l
{hi
{=fl
{?h_l
{s_m
{m_n
{B[l
{nB^
{m_n
{B[l
{^