CIRCUTOR MDC-4 - Manual (Page 8)

3.2.- INSTALLATION
The unit is installed on a DIN rail.
The unit must be mounted inside an electric panel.
The unit must be connected to a power circuit that is protected with gL fuses (IEC 269) or M
fuses, with a rating of 1 to 2 A. It must be fitted with a circuit breaker or equivalent device for
disconnecting the unit from the power supply mains.
The power and voltage measuring circuit must be connected with cables that have a minimum
cross-section of 1mm 2 .
Terminals, opening covers or removing elements can expose parts that are
hazardous to the touch while the unit is powered. Do not use the unit until it is
fully installed.
8
MDC-4
Instruction Manual