CIRCUTOR QNA-P Series - Manual (Page 19)

Page no. 18
7.2.- Start-up.
A screen identifying the equipment will appear on the display when first
starting the QNA-412.
After a few seconds the first screen will appear where the voltages that the
QNA is measuring in the three phases will be displayed.
Using the and different display screens can be browsed.
7.3.- Display screens.
The different display screens on the QNA-412 are:
Voltage measured in the system.
Current measured in the system.
Active power.
kw not flashing = kW
kw flashing = MW
Power factor.
Unbalance coefficient.
Asymmetry coefficient.
Frequency.
Date
Day / month
Year
Clock
Hours / minutes
Seconds
Neutral-Earth Voltage.
Neutral Current.