COMMELL LP-173 - Manual (Page 12)

LP-173 User’s Manual
- 12 -
2.4 <Memory Setup>
The board provide 204-pin DDR3L SO-DIMM to support 1066/1333MHz up to 8GB.
Support Non-ECC, unbuffered memory only
2.5 <CMOS & ATX Setup>
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, please remove battery to clear (reset) the CMOS to its
default values.
Jumper: JAT
Type: onboard 3-pin jumper
JAT Mode
1-2 AT Mode
2-3 ATX Mode
Default setting
Jumper: JRTC
Type: onboard 3-pin jumper
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting