COMMELL LP-173 - Manual (Page 13)

LP-173 User’s Manual
- 13 -
2.6 <SATA Interface>
Based on SOC, the board provides one Serial ATAII interfaces with up to 300MB/s of
transfer rate.
2.7 <LAN Interface>
The board integrates with one Intel® I210-AT controller, The Intel Gigabit Ethernet
supports triple speed of 10/100/1000Base-T, with IEEE802.3 compliance.
2.8 <Onboard Display Interface>
Based on Intel Processor with built-in I HD Graphic, the board provides one DVI
connector on real external I/O port, and LVDS interface with 5-pin LCD backlight inverter
connector. The board provides dual display function with clone mode and extended
desktop mode for CRT, DVI and LVDS.
2.8.1 <Analog VGA Interface>
Please connect your CRT or LCD monitor to the onboard CRT connector .
Connector: CN_CRT
Type: onboard 16-pin connector for CN_CRT connector pitch 2.00mm
Pin Signal Pin Signal
1 BR 2 BG
3 BB 4 NC