COMMELL LP-173 - Manual (Page 31)

LP-173 User’s Manual
- 31 -
3. Boot to EFI-Shell mode ( UEFI Boot Enable, Legacy Boot Disable)
then input the “fs0:” command to switch to the root of the USB flash
drive.
4. Type the ” fpt64.efi -y -f xxx.bin” command to start flash BIOS
processes. ( xxx.bin means the BIOS file that you want to update)
5. When it finished all update processes, restart the system.
Any question about the BIOS re-flash please contact your distributors or visit the
web-site at below:
http://www.commell.com.tw/support/support.htm
UT
Appendix C <Programming GPIO’s>
The GPIO’ can be programmed with the MSDOS debug program using