COMMELL LP-173 - Manual (Page 16)

LP-173 User’s Manual
- 16 -
To setup the LCD, you need the component below:
1. A panel with LVDS interfaces.
2. An inverter for panel’s backlight power.
3. A LCD cable and an inverter cable.
For the cables, please follow the pin assignment of the connector to make a cable, because
every panel has its own pin assignment, so we do not provide a standard cable; please find
a local cable manufacture to make cables.
LCD Installation Guide:
1. Preparing the LP-173, LCD panel and the backlight inverter
2. You would need a LVDS type cable.
3. To connect all of the devices well.After setup the devices well, you need to select
the LCD panel type in the BIOS.
The panel type mapping is list below:
For sample illustrator only
Panel side Board side