Computronic Controls Sentinel 150 - Manual

ci0033
issue 4, 2015-09-03
Sentinel 150 series
Automatic switch mode battery chargers
Installation, Operation and Maintenance
This Manual Refers to the Following Models
Standard models UL recognised/listed models
Open frame
models
SNTL1501205CDxx
SNTL1502405CDxx
SNTL1501210CDxx SNTLUL1501205CDxx
SNTLUL1502405CDxx
SNTLUL1501210CDxx
Enclosed
models
ESNTL1501205CDxx
ESNTL1502405CDxx
ESNTL1501210CDxx ESNTLUL1501205CDxx
ESNTLUL1502405CDxx
ESNTLUL1501210CDxx
ESNTLUL1501210CDxxNFPA
Note: “xx” above refers to battery type options specified on order: see pages 3 and 6 (DC Output calibration) for battery types/voltages.
For safe and correct use of these chargers, read and save the safety
information that precedes the installation and operation instructions.
This guide contains 8 pages (including this one). If any pages are missing,
contact the battery charger supplier or manufacturer for replacement
documentation.
Sentinel 150 (open-frame, with protective cover)
SNTL150 model shown
Enclosed Sentinel 150
ESNTLUL150 (left) and ESNTLUL150xxNFPA (right) models shown
For sales & support, contact:
ENOVATION CONTROLS LTD.
Church Road, Laverstock,
Salisbury, SP1 1QZ, United Kingdom
Phone: +44 1722 410055
Fax: +44 1722 410088
E-mail: [email protected]
Web: www.computroniccontrols.com
www.fwmurphy.eu/computronic
ENOVATION CONTROLS
5311 S 122nd East Avenue,
Tulsa, OK 74146, USA
Phone: +1 918 317 4100
Fax: +1 918 317 4266
E-mail: [email protected]
[email protected]
Web: www.fwmurphy.com