CUE touchCUE-V i - Manual (Page 13)

IP settings
This page is used for establishing the communication parameters for your touchCUE. The touchCUE uses
standard internet protocol (IP) communication parameters. Certain parameters can be reset by the user. On
start up, his page will display the touchCUE’s given Physical address (MAC), Current IP address. Carefully
note this addressing information (and any changes you elect to make to the IP address, subnet mask, or
default gateway). This information must be entered into the CUE System Director® program written for your
specific application. For control systems with more than one touchCUE or ipCUE, a unique IP address must
be given to each unit.
Some control systems are “stand alone” and not part of a larger network. For such “stand alone” systems,
the Host name is optional. However, for control systems that are connected to a larger network, please
obtain the Host name from the network administrator, and enter it into the corresponding box. DHCP is not
supported in this release. Be sure to click the Apply button for any changes to the IP settings to become
effective!
DNS
This page is used for setting parameters of your touchCUE’s DNS server. On start up, this page will display
the touchCUE’s given Current primary DNS server, Current secondary DNS server. You can reset the
primary DNS server and secondary DNS server manually by entering your changes into the appropriate
User Manual touchCUE-V /i
www.cuesystem.com
Page 13 of 27