d&b Z5356 E4 Ball joint adapter - Manual (Page 4)

1.1. Safety precautions
General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case you have any doubt as to the proper
functioning and safety of the items, these must be withdrawn from
use immediately.
Load safety information
The maximum permitted working load of the Z5356 E4/E5 Ball
joint adapter is 3 kg (6.6 lb) (according to BGV C1) which implies
the weight of one E4 or E5 cabinet.
1.2. Intended use
The d&b Z5356 E4/E5 Ball joint adapter must only be used in
conjunction with the d&b E-Series loudspeakers E4 and E5 as
described in these mounting instructions.
The adapter allows E4 and E5 cabinets to be connected to
different d&b mounting accessories such as:
–
E6532 Super Clamp with
E6533 M10 adapter for Super Clamp
– Z5029 TV spigot
– Z5034 Stand adapter
– Z5035 M10 to 3/8" adapter
– Z5038 Fixing plate M10
1.3. Assembly
Tools required:
– Open-ended spanner/wrench (size #17)
– Allen hex key 3 mm
Ball joint adapter
The ball joint adapter is equipped with a set screw. It is used to
preset the clamping of the ball joint.
If necessary, adjust the set screw using the 3 mm Allen hex key.
Fig. 1: Z5356 E4/E5 Ball joint adapter
1. Z5356 Mounting instructions
d&b Z5356 E4/E5 Ball joint adapter , Mounting instructions (1.2 EN) 4