d&b Z5356 E4 Ball joint adapter - Manual (Page 6)

Attaching the assembly to the fixing plate
To attach the assembly to the fixing plate, proceed as follows:
1. Slacken the fixing screw
[F] and the set screw [S] to release
the M10 socket [I] of the ball joint.
2. Attach the assembly and bolt down the threaded insert to the
fixing plate.
3. Tighten the M10 socket using the spanner (size #17).
4. Set the desired angle of the cabinet and adjust the set screw
[S].
5. Finally tighten the fixing screw [F].
d&b Z5356 E4/E5 Ball joint adapter , Mounting instructions (1.2 EN) 6