d&b Z5375 T Base plate User Manual
Page 4
Advertising
Functionality of the cabinet's rigging mechanism
Front link mechanism
- Slide out the Front link until it is fixed in place.
Splay link mechanism
- Release both Locking pins and fold out the Splay link.
Preset splay angles on T10 cabinets
The splay angles between T10 cabinets can be set in the range from 0°
to 15° in 1° steps.
The splay angles are set at the central rear rigging strands of the T10
cabinets.
Z5375 Mounting instructions
(1.1 EN)
Page 4 of 8
Advertising