Datapath VSN890 User Manual
Page 14
Advertising
If you are connecting more than two expansion chassis together, you can continue to expand the gen lock
link to further downstream chassis by fitting a H-link board into the first slot of the first expansion chassis
and by connecting a gen-lock cable from the S-Link board directly into the H-Link card in the expansion
chassis, whilst at the same time connecting the H-Link output to the next Image4 graphics card. See the
following picture as an example. In this way you can create very large systems and maintain the gen
locking capability between all Image4 graphics cards.
14
Fig.12
Advertising