Doremi DCP-2000 - Manual (Page 6)

6. Back in the main Device Manager window, select the Dolby DFC100 device:
Figure 3: Device Manager GUI – “Dolby DFC100” Device Selected
7. Set the IP address of the DFC100 device.
8. Load the Unity matrix for the Dolby DFC100 device:
a. Click on the “Load” button.
b. Browse to the location of the “unity.txt” file on your USB stick and select it.
9. Enable the Dolby DFC100 device (check the “Enabled” field as presented on Figure 3
above).
10. Click on the Save button and close it – click on the ”Quit” button.
11. Reboot the server for the device information to be taken into account and for the
communication to be established.
D2K.DP.000462.DRM Page 6 Version 1.4
Doremi Cinema LLC Confidential
Field to use to set the
IP address
Load
Button
Enabled field
checked
Save Button
Quit Button