Doremi DCP-2000 - Manual (Page 8)

4.2 Wizard - Second Step
The second wizard window is illustrated below:
Figure 5: Wizard Window - Second Step
1. Open the CineLister application.
2. In the Editor tab, click on the New button to make a new playlist.
3. Select the clip “FS Red 3D” to be your only clip in the playlist.
4. Go to the Playback tab, ensure it is in Manual mode and click on the pause button to have
the clip played and paused on the first frame.
5. With your Spectroradiometer/Colorimeter, make the measurements for both the left and
right eyes and enter them in the red row of the wizard (see Figure 5).
6. After all the measurements have been made, click on the Stop button to stop the playback
on CineLister
7. Repeat steps 2 to 6 for the other clips:
o FS Green 3D
o FS Blue 3D
o FS Peak White 3D
8. Once all the measurements have been entered, the wizard enables the Next step button.
Click on the Next button to go to the last step.
D2K.DP.000462.DRM Page 8 Version 1.4
Doremi Cinema LLC Confidential