Future Automation MLS - Manual (Page 18)

Operation Details
EMERGENCY STOP
This connection will
stop all functions of
the mechanism
once broken /
removed.
DC1
A low voltage connection for the
switches in the lift mechanism. The four
LEDs indicate the state the mechanism is in.
CC1 Not Lit: Flap is OPEN
CC2 Not Lit: Flap is CLOSED
CC3 Not Lit: Beam is DOWN
CC4 Not Lit: Beam is UP
DC2
A low voltage connection for the
switches in the swivel mechanism. The two
LEDs indicate the state the mechanism is in.
AC1
Gives an ouput of 240V(or 110V) to
control the Marine Lift motor.
Outputs stay live for 60 seconds after
the OUT or IN fuctions are selected.
Sheet 17 of 18
ISSUE: 011
www.futureautomation.co.uk
FUTUREAUTOMATION
MLS
Marine Lift Swivel Mechanism
Instruction Sheet