Future Automation QA2 - Manual (Page 10)

Cable Management
Feed the screen, speaker and signal cables though the bottom of the mechanism and
then out into the lower arm, then up the elbow tube and out into the upper arm. Then
out the lower face of the upper arm and through the centre of the screen plate ready to
connect to the screen.
Feed the mechanism power and IR cable through the other bottom arm as shown and
connect to control board.
In
st
al
la
ti
o
n
:
S
ta
ge
5
Page 9 of 22 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
QA2 & QA2-60 - Quad Arm

Mechanism power
& control cables AV power and
signal cables
Wall