Future Automation QA2 - Manual (Page 18)

In
st
al
la
ti
o
n
:
E
le
ct
ric
al
c
on
ne
ct
io
n
Page 17 of 22 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
QA2 & QA2-60 - Quad Arm
Contact Closure
Use an RJ45 connector in the
CC1 socket on the control box
to operate via contact closure
  SLQV
Warning lights
- LED’s to show operation of limit
switches and in switch.
Any contact closure input whilst the
mechanism is in motion will stop the
movement and all other contact closure
commands will be disabled for 1 second.
568A 568B
1 12V SUPPLY 12V SUPPLY - CURRENT LIMITED W/G W/O
2 12V LATCH
When 12V attached, device will go OUT. When
12V removed, device will go IN.
G O
3 GROUND GROUND W/O W/G
4 DEVICE LATCH
Momentary short to GROUND (pin 3), device will
go IN.
BL BL
5 VIEWING ANGLE D
Momentary short to GROUND (pin 3), moves
arm out to viewing angle D.
W/BL W/BL N / A
6 VIEWING ANGLE F
Momentary short to GROUND (pin 3), moves
arm out to viewing angle F.
O G N / A
7 PRESET
Momentary short to GROUND (pin 3), moves
arm to recess position, head parallel.
W/BR W/BR N / A
8 DEVICE IN
Momentary short to GROUND (pin 3), makes
device go fully IN.
BR BR N / A
PIN DESCRIPTION ACTION
WIRE / CABLE CONTACT CLOSURE
LED INDICATOR