Future Automation QA2 - Manual (Page 11)

In
st
all
at
io
n
: S
ta
ge
6
QA2 & QA2-60 - Quad Arm
Testing Mechanism & Replacing Panel Covers
This is a good point to test the mechanism and make sure it’s working properly. Make sure
cables are restrained/cable tied in the arms and have enough slack for movement.


Finally fix all the arm panel covers back on.
Page 10 of 22 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565