Future Automation PICH - Manual (Page 7)

In
st
all
at
io
n
: S
ta
ge
2
Page 6 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PICH - Picture Lift Heavy Mechanism
Mounting the Mechanism
Firstly, before attempting to fit the mechanism, it is most important to check that the recess
is built to the requirements specified in the PICH Technical Sheets.
Insert the mechanism into the recess in the wall, try to make sure the alignment of the
mechanism is symmetrical about the screen.
With the mechanism in place, fix through the top and bottom front edges of the mechanism. The
type of fixings will depend on the type of wall the mechanism is being fixed to.