Future Automation PICH - Manual (Page 8)

In
st
al
la
ti
o
n
:
S
ta
ge
3
Page 7 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PICH - Picture Lift Heavy Mechanism
- THE BOX MUST BE EASY TO ACCESS!
- Wire up the control box, refer to page 12 Electrical Connection
- Connect the control box to the mains power supply
- Connect the infrared remote sensor even if you are going to
use switch control
- Cables can be easily extended
- There is no manual drop function, access is required for servicing
Control box setup
make sure the mechanism is securely
mounted in place using the fixing holes
shown above
If a timber framed stud wall has been constructed, then use appropriate wood screws
to fix the mechanism in place.
Mounting the Mechanism